Creality CR-10 SE User Manual

6. Functional Specification
19
6.1 Auto extrude
6.2 Auto retract
The current interface
is for reference only.
Due to the continu-
ous upgrading of
functions, it shall be
subject to the latest
software/firmware UI
published on the
official website.

Creality CR-10 SE Specifications

General

Build Volume	300 x 300 x 400 mm
Nozzle Diameter	0.4 mm
Bed Temperature	up to 110°C
Supported Filaments	PLA, ABS, PETG, TPU
Extruder Type	Direct Drive
Filament Diameter	1.75 mm
Display	4.3-inch touch screen
Printing Speed	up to 200 mm/s
Nozzle Temperature	Up to 300°C
Connectivity	USB
Power Supply	350W
Leveling	Automatic Leveling