Creality CR-10 SE User Manual

4. About the Power-on Guide and User Interface
4.2 About the
User Interface
11
Home
Prepare
Use the preparation interface to
set functions such as axis movement,
temperature control for filament extrude/
retract, and model fan cooling.
Hotbed
temperature
Nozzle
temperature
Parameters can
be manually set
The current interface is for reference only.
Due to the continuous upgrading of functions,
it shall be subject to the latest software/-
firmware UI published on the official website.

Creality CR-10 SE Specifications

General

Build Volume	300 x 300 x 400 mm
Nozzle Diameter	0.4 mm
Bed Temperature	up to 110°C
Supported Filaments	PLA, ABS, PETG, TPU
Extruder Type	Direct Drive
Filament Diameter	1.75 mm
Display	4.3-inch touch screen
Printing Speed	up to 200 mm/s
Nozzle Temperature	Up to 300°C
Connectivity	USB
Power Supply	350W
Leveling	Automatic Leveling