Creality CR-10 SE User Manual

2. Parts List
Base component
1
Material Rack and Filament
Detection Component
5
Filament tube ×2
6
Gantry Frame Assembly
2
Accessory kit
12
Tool kit
Cutting plier
14
10-12 mm open-ended
wrench
13
Power cable
8
9
Hexagon Socket Head
Cap Screw with Spring
Washer M5*45 ×5
10 Hexagon Flat Round
Head Screw M4*25 ×4
02
Display Screen
Component
4
Light stand
3
Wire Clamp
7
Tips: the above accessories are for reference only. Please refer to the physical accessories.
11 Hexagon Flat Round
Head Screw M5*8 ×2
15
Filament
USB flash disk
18
Nozzle cleaner
17
Nozzle cleaner
16
Quick Installation Guide
19
V1.2
Quick Installation Guide
CR-10 SE
EN CN
After-sales
Services Card
20
After-Sales
Service Card
E-mail: cs@creality.com
Scan the code to know more
V2.2

Creality CR-10 SE Specifications

General

Build Volume	300 x 300 x 400 mm
Nozzle Diameter	0.4 mm
Bed Temperature	up to 110°C
Supported Filaments	PLA, ABS, PETG, TPU
Extruder Type	Direct Drive
Filament Diameter	1.75 mm
Display	4.3-inch touch screen
Printing Speed	up to 200 mm/s
Nozzle Temperature	Up to 300°C
Connectivity	USB
Power Supply	350W
Leveling	Automatic Leveling