Crestron TST-902 - Set up a Wi-Fi Network Connection

Product Manual — Doc. 7750C TST-902 • 85
the ERgateway as described in its documentation.
Set Up a Wi-Fi Network Connection
The TST-902 supports an optional connection to a Wi-Fi network. Advanced wireless capabilities
such as streaming video, voice recognition, web browsing, and dynamic graphics are supported
only by using both ER and Wi-Fi communications together (dual-mode).
NOTE:If a Wi-Fi connection is not configured, the USBport on the TST-902 must be used to
load user projects, perform certain configuration tasks, and update firmware. The USBport
is located under the battery cover and to the left of the battery.
To connect the TST-902 to a Wi-Fi network:
1. Access the TST-902 setup screens as described in Access the Setup Screens on page 83.
The TST-902 Setup screen is displayed.