© 2021 All rights reserved. Data subject to change without notice. 5
Rev. C | 2021.12 FCS - Installation Manual
1 POLICIES
1.1 Important Note
Read and understand this manual prior to using this instrument. Carefully read the warranty
policy, service policy, notices, disclaimers and revisions on the following pages.
This product must be installed by a qualied electrician or factory trained technician and
according to instructions indicated in this manual. This instrument should be inspected and
maintained on a regular basis by a qualied and trained technician.
This instrument has not been designed to be intrinsically safe. For your safety, do not use it
in classied hazardous areas (explosion-rated environments).
INSTRUMENT SERIAL NUMBER:
__________________________________________________________
PURCHASE DATE:
__________________________________________________________
PURCHASED FROM:
__________________________________________________________
1.2 Warranty Policy
Critical Environment Technologies Canada Inc. warrants the products we manufacture
(excluding sensors, battery packs, batteries, pumps, and lters) to be free from defects in
materials and workmanship for a period of two years from the date of purchase from our
facility. As a reminder, sensors are consumable items and once they leave our factory, we
cannot reuse or resell them. As such, all sensor sales are nal. Should the sensor itself be
faulty, there is a one-year pro-rated warranty that would apply from the date of purchase from
our facility.
The warranty status may be affected if the instrument has not been used and maintained
as per the instructions in the manual or has been abused, damaged, or modied in any way.
The product is only to be used for the purposes stated in the manual. Critical Environment
Technologies is not liable for auxiliary interfaced equipment or consequential damage.
All returned goods must be pre-authorized by obtaining a Returned Merchandise
Authorization (RMA) number. All goods must be shipped to Critical Environment
Technologies freight prepaid.Contact the manufacturer for an RMA number and procedures
required for product transport.
Due to ongoing research, development, and product testing, the manufacturer reserves the
right to change specications without notice. The information contained herein is based
To Next Page
Loading...