CTC Union GSW-3208M User Manual

Chapter 6. Manage / Configure the Switch
108
Mode: This is used to enable/disable Mirror function.
Monitering Port: This is used to set the capture port. The switch will copy the traffic from Monitored Port to this port
if Mirror function is enabled.
Monitored Port: This is the monitored port. The switch will copy the traffic from this port to Monitoring Port.
5). Rate Control
Two traffic rates could be controlled by the switch. One is the ingress/egress traffic of each port. Another is
Broadcast/Multicast/Unicast Storm Control.
5-1) Rate Control Configuration
This function can setup the ingress and egress rate limit of ports.

CTC Union GSW-3208M Specifications

General

Brand	CTC Union
Model	GSW-3208M
Category	Switch
Language	English