CUMMINS ALLISON JetScan iFX i100 User Manual

© 2013 Cummins-Allison Corp.
23
Report Menu Key
Description
DAY REPORT
(Continued)
2. Do one of the following:
• Press
OK
to clear all day totals to
0
and return to the DAY TOTALS
screen.
• Press
CANCEL
to return to the DAY TOTALS screen without
clearing totals.
BATCH REPORT
Prompts the BATCH TOTALS screen shown below.
The DENOM column lists denominations. The TICKET line appears if the
machine is set to process tickets. The CHECK line appears if the machine is
set to process checks. The COUNT line appears if the machine is set for
COUNT
mode. Use the arrow keys to view additional documents.
The UNIT column shows current piece counts. The VALUE column shows the
current total value by denomination and the grand total.
When a printer is connected, pressing
PRINT
generates the batch report.
When the
ADD key
is
ON
and a batch is suspected of being incorrect, press
CLEAR
to clear the active batch total along with the associated strap count
and day total.
Press
EXIT
to return to the REPORT MENU screen.
To end a batch:
1. Press
END
once on the main screen.
Totals on the BATCH TOTALS screen clear to 0 and
cannot be recovered when a new batch is
processed. Strap counts are not cleared unless
STRAPS CLEAR is set to ENDBT in SETUP.
BATCH REPORT
may be used to view or print totals
after the batch total is cleared to
0
on the main
screen.
If a printer is connected or a communication port is
being used to send data to a PC, a batch report is
generated automatically when the batch is ended.

CUMMINS ALLISON JetScan iFX i100 Specifications

General

Brand	CUMMINS ALLISON
Model	JetScan iFX i100
Category	Bank Note Validator
Language	English