CUMMINS ALLISON JetScan iFX i100 - Page 36

JetScan iFX
®
i100 Scanner All Models
34
File Export Menu Key
Description
DOC EXPORT CFG
(Document Data Export
Configuration)
Prompts the DOC DATA EXPORT CONFIGURAITON screen below.
About FILE EXPORT NAME:
To customize the name of a file that will be exported:
1. Press
SET
to prompt the keypad. Press
SHIFT
to toggle the keypad
between capital letters, lower-case letters, and numbers and
symbols. Press
SPACE
to add a space between characters. If
necessary, press ◄ to delete one character, which will begin at the
right and move left.
2. Type in the desired file name; a dot (.); and a file-extension suffix
(example: image.csv). The file name can be 20 characters in length.
3. When finished, press
DONE
.
About FILE INCREMENT:
When FILE INCREMENT is
ON
, the machine automatically increments the
file name if a file with the same name already exists in the file location.
For example, if the file name is image.csv, the incremented file name will
be imagexx1.csv.
About FILE LOCATION:
To assign a file location for a file that will be exported:
1. Press
USB
to prompt the keypad and export the file to a USB drive
connected to the machine.
Press
SHIFT
to toggle the keypad among capital letters, lower-case
letters, and numbers and symbols.
Press
SPACE
to add a space between characters. If necessary, press
◄ to delete one character, which will begin at the right and move
left.
2. Type the file location. The root-directory symbol ( \ ) is displayed by
default. The machine cannot be used to create a directory. To export
a file to a specific directory on the flash drive, the directory must be
created on a PC before specifying it in the FILE LOCATION field.