© 2013 Cummins-Allison Corp.
DOC EXPORT CFG
(Continued)
3. When configuration is complete, press
to return to the DOC
DATA EXPORT CONFIGURATION screen.
4. Press
to retain settings.
5. Press
to return to the FILE EXPORT MENU screen.
If a specific target directory is not needed on the
flash drive, simply press
. The root-directory
symbol ( \ ) is still displayed by default.
Settings are not saved if EXIT is pressed
before
.
DOC EXPORT
(Document Export)
The
DOC EXPORT button on the FILE EXPORT MENU is used to export a
comma-delimited file to a USB flash drive.
To export a comma-delimited file:
1. Ensure that the desired export directory already exists on the USB
flash drive. Insert the flash drive into the USB port on the back of
the machine after
the machine has been turned
and it has
initialized.
2. Configure settings on the DOC DATA EXPORT CONFIGURATION
screen.
3. Ensure the machine is in a batch-ended condition.
4. Select DOC EXPORT
from the FILE EXPORT MENU screen.
One of the following messages will appear on the bottom of the screen:
FILE EXPORT SUCCESSFUL or ERROR: INVALID FILE EXPORT LOCATION.
When the file-export procedure is complete,
day totals
be cleared prior to resuming
processing and exporting new data. This action
clears day totals, purges all note serial numbers,
check MICR characters and ticket validation
numbers from memory, and clears the piece
count when using
mode.
Failure to perform this step will result in:
• An incomplete export.
• Co-mingled data. Old batch data will be
combined with new batch data when the next
file export is performed.
To Next Page
Loading...
