56
Curtis 1222 Manual, os 15
2 9 J A N U A R Y 2 0 1 3 D R A F T
MOTOR TYPE PARAMETER
ALLOWABLE
PARAMETER RANGE DESCRIPTION
Motor Type 0 – 22
•
n
This parameter references a predefined set of motor parameters for
0x40B0 0x00 0 – 22 many AC motors. The table also provides appropriate settings for the
FW Base Speed parameter.
If your motor is not included here, consult your local Curtis
customer support engineer for information on how to set these three
parameters based on your application and motor.
Motor Type STEER MOTOR VOLTAGE (V) WATTAGE (W) FW Base Speed (rpm)
0 [User defined] n/a n/a n/a
1 ABM 4DG63D_4 24 670
2600
2 CFR AM106.0026 24 1000
2500
3 Kordel KM A 63/4-80/3 24 700
450
4 Iskra ASG 7101 24 300
1525
5 [Reserved] n/a n/a n/a
6 Metalrota ARD114 24 700
2020
7 CFR AM106.0124 36 600
2200
8 CFR AM106.0059.01 48 600
1250
9 Schabmuller 50060170 24 580
500
10 Superec SY09-0.6Q 24 600
2300
11 Kordel KM A 80/4-60/3 24 400
2300
12 Iskra ASG 7102 24 300 2900
13 Metalrota ARD111A or ARD 117 48 700
790
14 Schabmueller 10066174 48 500
600
15 CFR AM090.0019 48 400
960
16 CFR AM090.0021 24 400
1500
17 Yuchen XQY-0.6 24 600 3000
18 Tongda OR743001 48 700
1200
19 ABM SDH14576/DG63D-4 48 900
2000
20 Superec B493112 48 600
2200
21 CFR AG106.0060 24 800
2850
22 KDS YDZ0.6-4-6740 48 600
1620
3 — PROGRAMMABLE PARAMETERS: Motor Type Parameter
PCF
RIS
To Next Page
Loading...
