Curtis 1297 User Manual

Curtis PMC 1297 Manual
62
SERVICE TOTL
When the total service timer expires, the controller automatically sets the
service total parameter On. The user must then program the service total
parameter Off to indicate the appropriate service has been performed.
SERVICE TRAC
When the traction service timer expires, the controller automatically sets the
service traction parameter On. The user must then program the service traction
parameter Off to indicate the appropriate service has been performed.
SERVICE PUMP
When the pump service timer expires, the controller automatically sets the
service pump parameter On. The user must then program the service pump
parameter Off to indicate the appropriate service has been performed.
3 C — PROGRAMMABLE SHARED PARAMETERS: Hourmeters
Hourmeter Reset Service Times

Curtis 1297 Specifications

General

Brand	Curtis
Model	1297
Category	Controller
Language	English