© 2014 Cygnus Automotive Limited
67
ERR 2 The software in the MR400 may be invalid. Try re-
applying the power. (Invalid bank number.)
ERR 3 Error during software upgrading. (Invalid
command.)
ERR 4 The software in the MR400 may be invalid. Try re-
applying the power. (Checksum failure)
ERR 5 The software in the MR400 may be invalid. Try re-
applying the power. (Bad firmware version)
ERR 6 Error during software upgrading. (Erase failure).
ERR 7 Wrong memory type for the software installed.
ERROR - METER
DISABLED -
An attempt has been made to enter HIRED mode
when the meter’s Disable Feature is in use and the
Disable Date has been reached.
5.4.3
ERROR - NO
TARIFF
INSTALLED
An attempt has been made to enter HIRED mode
when the meter has no tariff installed in it.
2.6
EXTR “Extras”. (Totals). 6.4
FAILED AGAIN -
CONTACT DEALER
The meter has failed on its second attempt to set its
internal clock on power up. This may indicate a
fault.
FAILED TO SET
CLOCK - TRY
AGAIN.
The meter has failed to set its internal clock on
power up. Repeat the attempt.
FARE “Fare”. (Totals) 6.4
FEB February
FIRM “Firmware”. Part of the “Tariff and Software
Information” sub-menu.
5.6.5
FRI Friday
GOOD
AFTERNOON
Standard greeting when FOR HIRE mode is first
entered on power up. These messages are designed
as a quick check that the meter is functioning
correctly and that the time is set correctly.
2.4
GOOD EVENING - Standard greeting as above. 2.4
GOOD MORNING - Standard greeting as above. 2.4
HELD Indicates that a pulse count is “HELD”, or
suspended.
5.7.1
HIGH “High” brightness setting. 5.5.1
HIRE SIGN
DETECTION -
Prompt in INFO Menu for setting the Hire Sign
Detection feature.
IT IS NOT
POSSIBLE TO LOG
ON TO THE METER
AS THE TOTALS
ARE INVALID
PRESS SELECT TO
CLEAR THE
The meter’s totals information has become
corrupted. This means that it has lost the driver
records etc. In order to use the meter again, you
need to re-format the totals memory by pressing the
SELECT button. This message is produced when
you attempt to enter HIRED mode.
2.5
To Next Page
Loading...
Need help?
General
