Cypress CY3684 - Required Tools Not Included; Other Suggested Tools; Document Revision History; Documentation Conventions

8 EZ-USB Development Kit User Guide, Doc. # 001-66390 Rev. *D
Introduction
■ Reference schematics and PCB design and layout files.
■ Limited evaluation version of the Keil 8051 development tools (Compiler, Assembler, IDE,
Debugger)
1.2.3 Required Tools Not Included
■ Full retail Keil Development System (Keil uVision2)
■ Microsoft Visual C++ and C# (all PC sample codes are developed on this platform).
■ USB-capable PC running Windows 2000, XP, Vista, or 7.
1.2.4 Other Suggested Tools
■ CATC USB Protocol Analyzer.
1.3 Document Revision History
1.4 Documentation Conventions
Table 1-1. Revision History
Revision
PDF
Creation
Date
Origin
of
Change
Description of Change
** 02/07/2011 ROSM Initial version of user guide
*A 05/09/2011 NMMA Update to section 2.2 Schematic Summary
*B 06/06/2012 NMMA The document has to be updated with the OOB review comments.
*C 06/29/2012 NMMA
Minor text edits. Updated correct path “Start->All programs->Cypress-
>Cypress Suite USB 3.4.7-->CyConsole” in the document.
*D 09/27/2013 DBIR Removed Section 7.2.4, Bulkloop Application.
Table 1-2. Document Conventions for Guides
Convention Usage
Courier New
Displays file locations, user entered text, and source code:
C:\ ...cd\icc\
Italics
Displays file names and reference documentation:
Read about the sourcefile.hex file in the PSoC Designer User Guide.
[Bracketed, Bold]
Displays keyboard commands in procedures:
[Enter] or [Ctrl] [C]
File > Open
Represents menu paths:
File > Open > New Project
Bold
Displays commands, menu paths, and icon names in procedures:
Click the File icon and then click Open.
Times New Roman
Displays an equation:
2 + 2 = 4
Text in gray boxes Describes Cautions or unique functionality of the product.