Cypress CY3684 - Testing Bulkloop Example Using Bulkloop C#.NET Application

82 EZ-USB Development Kit User Guide, Doc. # 001-66390 Rev. *D
EZ-USB Development Kit Firmware Examples
Figure 8-7. Bulkloop using CyBulk Application
8.5.5.3 Testing Bulkloop Example using Bulkloop C# .NET Application
The Bulkloop firmware can be tested using the Bulkloop C# .NET application, which is located at
Start > All Programs > Cypress > Cypress SuiteUSB 3.4.7 > Bulkloop. Select the Bulkloop OUT
and Bulkloop IN endpoint pairs EP2 and EP6, or EP4 or EP8. Click Start and observe the number of
successful Bulk IN and Bulk OUT Transfers
Figure 8-8. Bulkloop using Bulkloop C# Application