103D-Link D-ViewCam User Manual
Section 3 - Conguration
Monitor Display Setting
Activate auto scan to rotate the channels/cameras on screen. For instance, you may select to show only 4 sub-screens on the live viewer
while having 16 channels connected to the system.
Step 1: Select the Monitor connected to the system.
Step 2: From the Auto scan group drop-down, select a group.
Step 3: Select a primary channel that will always be on the screen when activating auto scan settings.
Step 4: Select a channel that has secondary priority then primary channel on the screen when activating auto scan settings.
Step 5: From the Layout drop-down, select the screen division you want displayed.
To Next Page
Loading...
