D-Link DCS-100 - Post Processing Tool; General Setting; Filter Setting

65D-Link D-ViewCam User Manual
Section 3 - Conguration
Post Processing Tool
General Setting
Select the option to either apply the lter settings to only the active channels
or to all channels.
Filter Setting
Visibility: Check the box and adjust the gamma value of the image to enhance
the image and make it cleaner.
Sharpen: Check the box to activate. Move the slider control to the right to
sharpen the image or to the left to soften it.
Brightness: Check the box to activate. Move the slider control to the right to
make the image brighter.
Contrast: Check the box to activate the function. Move the slider control to
the right to increase contrast.
Grey Scale: Check the box to show the record in grey scale mode so the
image displays in black and white.
Default: Click to change the settings back to the default settings.
OK: Click to save and apply your settings.