D-Link DCS-100 - Add;Rotate;Delete Device Indicator

86D-Link D-ViewCam User Manual
Section 3 - Conguration
Edit E-Map
Step 1: Make sure you are in Edit Mode and all devices are connected.
Step 2: Right-click on the Map icon to obtain the option menu to edit map, or just click the Edit Map button to open the “Map Cong”
dialog.
Step 3: Modify the required details and then click OK to save conguration.
Delete E-Map
Step 1: Make sure you are in Edit Mode and all devices are connected.
Step 2: Right-click on the Map icon to open the option menu to delete map, or just click Delete to remove the map from the list.
Note: The root map cannot be deleted.
Add/Rotate/Delete Device Indicator
Add Indicator:
Step 1: Make sure you are in Edit Mode and all devices are connected.
Step 2: Select on the Map icon which you want add device indicator to.
Step 3: Before adding indicator, ensure that the map you want is displayed. Select device from list and directly drag a device to the desired
location on the map.
Note: Different device is symbolized by different indicator.
- Camera indicator - digital Input indicator