129D-Link D-ViewCam User Manual
Section 4 - FAQs
In order to save bandwidth, the default setting for audio is disabled, user needs to enable this function manually, please
follow those steps.
Step 1: Go to [Config]--->[Setting]--->[General] please
enable [Preview Active Channel]
Step 2: Default channel means the background audio of
camera channel.
Step 3: Switch audio channel
When choose sub-screen 1, you will hear audio from camera 1
When choose sub-screen 2, you will hear audio from camera 2
If you don’t choose any sub-screen, you will hear audio of
default channel.
4. How do I enable audio in live streaming for IP cameras?
To Next Page
Loading...
