D-Link DES-3010G - To Display IP Interface Settings

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
show ipif
Purpose Used to display the configuration of an IP interface on the Switch.
Syntax
show ipif {<ipif_name 12>}
Description This command will display the configuration of an IP interface on the
Switch.
Parameters <ipif_name 12> - Enter the name of the IP interface for which to view the
settings. (System)
Restrictions None.
Example usage:
To display IP interface settings.
DES-3026:4#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
IP Address : 10.48.74.122 (MANUAL)
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Disabled
Link Status : Link UP
Member Ports : 1-26
DES-3026:4#
98