DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
To prevent SNMP traps from being sent from the Switch:
DES-3026:4#disable snmp traps
Command: disable snmp traps
Success.
DES-3026:4#
enable snmp authenticate trap
Purpose Used to enable SNMP authentication trap support.
Syntax
enable snmp authenticate trap
Description This command is used to enable SNMP authentication trap
support on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To turn on SNMP authentication trap support:
DES-3026:4#enable snmp authenticate trap
Command: enable snmp authenticate trap
Success.
DES-3026:4#
disable snmp authenticate trap
Purpose Used to disable SNMP authentication trap support.
Syntax
disable snmp authenticate trap
Description This command is used to disable SNMP authentication support on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable the SNMP authentication trap support:
DES-3026:4#disable snmp authenticate trap
Command: disable snmp authenticate trap
Success.
DES-3026:4#
44
To Next Page
Loading...
