D-Link DES-3010G - Show Stp Ports

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
Max Age : 20
Hello Time : 2
Forward Delay : 15
Hold Time : 3
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
Status 2 : STP disabled
DES-3026:4#show stp
Command: show stp
Bridge Parameters Settings
STP Status : Disabled
Max Age : 20
Hello Time : 2
Forward Delay : 15
Priority : 32768
STP Version : RSTP
TX Hold Count : 3
Forwarding BPDU : Enabled
DES-3026:4#
show stp ports
Purpose Used to display the Switch’s current per-port group STP configuration.
Syntax
show stp ports <portlist>
Description This command displays the Switch’s current per-port group STP
configuration.
Parameters
<portlist> − Specifies a port or range of ports to be configured.
Restrictions None.
Example usage:
To display STP state of all ports, with STP enabled:
65