DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
Example usage:
To display the current authentication session statistics for port 16:
DES-3026:4#show auth_session_statistics ports 1
Command: show auth_session_statistics ports 1
Port number : 1
SessionOctetsRx 0
SessionOctetsTx 0
SessionFramesRx 0
SessionFramesTx 0
SessionId
SessionAuthenticMethod Remote Authentication Server
SessionTime 0
SessionTerminateCause SupplicantLogoff
SessionUserName Trinity
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_statistics
Used to display the current authentication statistics.
show
auth_statistics {ports <portlist>]}
The show auth_statistics command is used to display the
current authentication statistics of the Switch on a per port basis.
Parameters
ports <portlist> − Specifies a range of ports to be viewed.
Restrictions None.
Purpose
Syntax
Description
Example usage:
To display the current authentication statistics for port 1:
DES-3026:4#show auth_statistics ports 1
Command: show auth_statistics ports 1
Port number : 1
EapolFramesRx 0
EapolFramesTx 0
EapolStartFramesRx 0
EapolReqIdFramesTx 0
EapolLogoffFramesRx 0
EapolReqFramesTx 0
EapolRespIdFramesRx 0
EapolRespFramesRx 0
InvalidEapolFramesRx 0
EapLengthErrorFramesRx 0
LastEapolFrameVersion 0
LastEapolFrameSource 00-00-00-00-00-00
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
123
To Next Page
Loading...
