D-Link DES-3010G - To Clear the Log Information; Show Log; Clear Log; Clear Counters

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
clear counters
Purpose Used to clear the Switch’s statistics counters.
Syntax
clear counters [ports <portlist>]
Description This command will clear the counters used by the Switch to compile
statistics.
Parameters
<portlist> − Specifies a port or range of ports to be cleared for
statistics.
Restrictions Only administrator-level users can issue this command.
Example usage:
To clear the counters:
DES-3026:4#clear counters
Command: clear counters
Success.
DES-3026:4#
clear log
Purpose Used to clear the Switch’s history log.
Syntax
clear log
Description This command will clear the Switch’s history log.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To clear the log information:
DES-3026:4#clear log
Command: clear log
Success.
DES-3026:4#
show log
Purpose Used to display the Switch history log.
Syntax
show log {index <value_list X-Y>}
Description This command will display the contents of the Switch’s history log.
Parameters
index <value_list X-Y> − Enter a value that corresponds to an entry
made in the log. Multiple entries may be made in the form of x-y, or
from a lower number entry to the higher number entry in the log. The
smallest number (and therefore the earlier entry) will be first.
Restrictions None.
52