D-Link DES-3010G - Show Traffic Control; To Display Traffic Control Setting for Ports 1-5

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
show traffic control
Purpose Used to display current traffic control settings.
Syntax
show traffic control {ports <portlist>}
Description This command displays the current storm traffic control configuration
on the Switch.
Parameters ports <portlist> - Enter a port or range of ports to be viewed.
Restrictions None.
Example usage:
To display traffic control setting for ports 1-5:
DES-3026:4#show traffic control group_list 1-5
Command: show traffic control group_list 1-5
Group Threshold Broadcast Multicast Destination
[port] (Kbit/sec) Storm Storm Lookup Fail
---------- ------------ --------------- --------------- ----------------
1 64 Disabled Disabled Disabled
2 64 Disabled Disabled Disabled
3 64 Disabled Disabled Disabled
4 64 Disabled Disabled Disabled
5 64 Disabled Disabled Disabled
Total Entries: 5
DES-3026:4#
74