DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
DES-3026:4#show 802.1x auth_state ports 1-5
Command: show 802.1x auth_state ports 1-5
Port Auth PAE State Backend State Port Status
------ -------------- ------------- ------------
1 ForceAuth Success Authorized
2 ForceAuth Success Authorized
3 ForceAuth Success Authorized
4 ForceAuth Success Authorized
5 ForceAuth Success Authorized
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
Example usage:
To display the 802.1x authentication states (stacking disabled) for MAC-based 802.1x:
DES-3026:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port number : 1
Index MAC Address Auth PAE State Backend State Port Status
------ ------------------- ----------------------- --------------------- -----------------
1 00-08-02-4E-DA-FA Authenticated Idle Authorized
2
3
4
5
6
7
8
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show 802.1x auth_configuration
Purpose Used to display the current configuration of the 802.1x server on the Switch.
Syntax
show
802.1x auth_configuration {ports <portlist>}
Description The show 802.1x command is used to display the current configuration of
the 802.1x Port-based Network Access Control server application on the
Switch.
The following details what is displayed:
802.1x Enabled/Disabled − Shows the current status of 802.1x functions on
the Switch.
Authentication Protocol: Radius_Eap − Shows the authentication protocol
suite in use between the Switch and a RADIUS server.
Port number − Shows the physical port number on the Switch.
Capability: Authenticator/None − Shows the capability of 802.1x functions
on the port number displayed above. There are four 802.1x capabilities that
can be set on the Switch: Authenticator, Supplicant, Authenticator and
Supplicant, and None.
Port Status: Authorized/Unauthorized − Shows the result of the
authentication process. Authorized means that the user was authenticated,
and can access the network. Unauthorized means that the user was not
111
To Next Page
Loading...
