DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
DSCP
Enter the DSCP bit for which to identify incoming packets. The user may choose a DSCP bit
between 0-63.
Port
The Access Rule may be configured on a per-port basis by entering the port number of the
Switch into this field. Entering all will denote all ports on the Switch.
To view the settings of a previously correctly configured rule, click in the Access Rule Table to view the following screen:
Figure 9- 12. CPU Interface Filtering Rule Display - IP
110
To Next Page
Loading...
