DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Offset
This field will instruct the Switch to mask the packet header beginning with the offset value
specified:
•
•
•
•
•
value (0-15) - Enter a value in hex form to mask the packet from the beginning of
the packet to the 15th byte.
value (16-31) - Enter a value in hex form to mask the packet from byte 16 to byte
31.
value (32-47) - Enter a value in hex form to mask the packet from byte 32 to byte
47.
value (48-63) - Enter a value in hex form to mask the packet from byte 48 to byte
63.
value (64-79) - Enter a value in hex form to mask the packet from byte 64 to byte
79.
Port
The Access Rule may be configured on a per-port basis by entering the port number of the
Switch into this field. Entering all will denote all ports on the Switch.
To view the settings of a previously correctly configured rule, click in the Access Rule Table to view the following screen:
Figure 9- 15. CPU Interface Filtering Rule Display – Packet Content
112
To Next Page
Loading...
