D-Link DGS-1210-08P - Page 162

6 Command Line Interface D-Link Smart Managed Switch User Manual
1
1
5
5
5
5
DGS-1210-10P> show nmsManaged
Status :Enable
Connection Status :Connected
Management status :Boarding
D-Link NMS URL :192.168.11.225:8443
Network UUID :620A-156E6F40-7E541DF2-663A
Periodic Message Interval :60
DGS-1210-10P>
show route
Purpose To display the routing status of IPv4 or IPv6 on the Switch.
Syntax show route {ipv4 | ipv6}
Description
The show route command displays the routing status of IPv4 or
IPv6 on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the IPv4 & IPv6 route status on the Switch:
DGS-1210-52MP> show route ipv4
IPv4 Static Route State : Disable
DGS-1210-52MP> show route ipv6
IPv6 Static Route State : Disable
DGS-1210-52MP>
show switch
Purpose To display the information of the Switch.
Syntax show switch
Description The show switch command displays the status of the switch.
Parameters None.
Restrictions None.
Example usage:
To display the switch information: