xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Sub VLAN Settings
This window is used to configure the sub VLANs of a super VLAN. A sub VLAN only can belong to one super VLAN and users
cannot bind an IP interface to it. The maximum number of sub VLANs for a super VLAN is 80.
To view this window, click L2 Features > VLAN > Super VLAN > Sub VLAN Settings, as shown below:
Figure 3- 24. Sub VLAN Table window
The following fields may be configured:
Parameter Description
VLAN Name
Enter the name of the sub VLAN.
VID (1-4094)
Enter the VLAN ID of the sub VLAN.
Clicking the Modify button will open the Sub VLAN Table – Edit window, shown below:
Figure 3- 25. Sub VLAN Table – Edit window
The following fields may be configured:
Parameter Description
Action
Use the drop-down menu to choose the desired action.
From IP Address
Enter the IP address to start from.
To IP Address
Enter the IP address to end with.
110
To Next Page
Loading...
