xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
address of a real device on the network. If the connection from the virtual router to this IP
address fails, the virtual router will automatically disabled. A new Master will be elected from
the backup routers participating in the VRRP group. Different critical IP addresses may be
assigned to different routers participating in the VRRP group, and can therefore define
multiple routes to the Internet or other critical network connections.
Checking Critical IP
Use the pull-down menu to enable or disable the Critical IP address entered above.
Click Apply to implement changes made.
To view the settings for a particular VRRP setting, click the corresponding
in the VRRP Interface Table of the entry, which
will display the following:
Figure 4- 109. VRRP Virtual Router Settings - Display window
This window displays the following information:
Parameter Description
Interface Name
An IP interface name that has been enabled for VRRP. This entry must have been
previously set in the IP Interface Settings table.
Authentication type
Displays the type of authentication used to compare VRRP packets received by a virtual
router. Possible authentication types include:
No authentication - No authentication has been selected to compare VRRP packets
received by a virtual router.
Simple Text Password - A Simple password has been selected to compare VRRP
packets received by a virtual router, for authentication.
IP Authentication Header - An MD5 message digest algorithm has been selected to
compare VRRP packets received by a virtual router, for authentication.
VRID
Displays the virtual router ID set by the user. This will uniquely identify the VRRP Interface
on the network.
Virtual IP Address
The IP address of the Virtual router configured on the Switch.
255
To Next Page
Loading...
Need help?
General