xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
configured in the Time Range Settings window. This will set specific times when this access
rule will be implemented on the Switch.
Counter
Tick the check box and use the pull-down menu to employ the Counter that will count the
packets identified with this rule. Users must note that if the Counter is employed in the ACL Flow
Meter function, the Counter will automatically be disabled here, regardless of this setting.
To view the settings of a previously, correctly configured rule, click in the Access Rule Table to view the window shown
below. Clicking the hyperlink for the Profile ID on the Access Profile Table window will also bring up the Access Rule Display
window.
Figure 6- 11. Access Rule Display window (Ethernet)
315
To Next Page
Loading...
