xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
begin with https://. (Ex. https://10.90.90.90) Any other method will result in an error and no access can be authorized for the web-
based management.
To view the windows for Download Certificate and Ciphersuite, click Security > SSL, as shown below:
Figure 7- 66. Download Certificate window
To download certificates, set the following parameters and click Apply.
Parameter Description
Certificate Type
Enter the type of certificate to be downloaded. This type refers to the server responsible for
issuing certificates. This field has been limited to Local for this firmware release.
Server IP
Enter the IP address of the TFTP server where the certificate files are located.
Certificate File Name
Enter the path and the filename of the certificate file to download. This file must have a .der
extension. (Ex. c:/cert.der)
Key File Name
Enter the path and the filename of the key file to download. This file must have a .der
extension (Ex. c:/pkey.der)
To set up the SSL function on the Switch, configure the following parameters and click Apply.
Parameter Description
Configuration
SSL Status
Use the pull-down menu to enable or disable the SSL status on the switch. The default is
Disabled.
398
To Next Page
Loading...
