D-Link DGS-3620-52P - Page 249

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
239
BGP Neighbor Session Settings
This window is used to configure BGP neighbor session settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Session Settings, as
shown below:
Figure 5-1158 BGP Neighbor Session Settings window
The fields that can be configured are described below:
Parameter Description
IP Address
Click the radio button and use the drop-down menu to select the IP address of the
BGP speaking neighbor.
Peer Group Name
Click the radio button and use the drop-down menu to select the name of the BGP
peer group.
State
Click the radio button and use the drop-down menu to enable or disable the state. If
the state is changed from Enabled to Disabled, the session with the neighbor peer will
be terminated.
Activity
Click the radio button and use the drop-down menu to enable or disable the state for
an individual address family.
Click the Apply button to accept the changes made.
BGP Neighbor Maximum Prefix Settings
This window is used to configure BGP neighbor maximum prefix settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Maximum Prefix
Settings, as shown below:
Figure 5-1169 BGP Neighbor Maximum Prefix Settings window
The fields that can be configured are described below:
Parameter Description
IP Address
Click the radio button and use the drop-down menu to select the IP address of
the BGP speaking neighbor.
Peer Group Name
Click the radio button and use the drop-down menu to select the name of the
BGP peer group.