D-Link DGS-3620-52P - Page 253

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
243
BGP Neighbor Filter Settings
This window is used to configure BGP neighbor filter settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Filter Settings, as
shown below:
Figure 5-12033 BGP Neighbor Filter Settings window
The fields that can be configured are described below:
Parameter Description
IP Address
Click the radio button and use the drop-down menu to select the IP address of the BGP
speaking neighbor.
Peer Group Name
Click the radio button and use the drop-down menu to select the name of the BGP peer
group.
Filter List Type Use the drop-down menu to select In or Out to apply to either inbound or outbound traffic.
Filter List Action Use the drop-down menu to select Add or Delete.
Filter List Name
Enter the name of an AS path access list to be applied as a filter. The filtering can be
applied to incoming routes or outgoing routes.
Prefix List Type Use the drop-down menu to select In or Out to apply to either inbound or outbound traffic.
Prefix List Action Use the drop-down menu to select Add or Delete.
Prefix List Name
Enter the name of a prefix list to be applied as a filter. The filtering can be applied to
incoming routes or outgoing routes.
Capability ORF
Prefix List Type
Use to configure an outbound route filter prefix list capability. It can be sent with the
following values:
Receive – Enable the ORF prefix list capability in the receiving direction. The local router
will install the prefix filter list notified by the remote router.
Send – Enable the ORF prefix list capability in the sending direction. The local router will
notify the remote router for the ORF prefix list capability.
Both – Enable the ORF prefix list capability in both received and send directions.
None – Disable the ORF prefix list capability in both received and send directions.
Click the Apply button to accept the changes made.
BGP Neighbor Table
This window is used to display BGP and TCP connections with the BGP neighbor or routing table entries
containing a BGP neighbor. For BGP, this includes detailed neighbor attribute, capability, path, and prefix
information. For TCP, this includes statistics related to BGP neighbor session establishment and maintenance.