xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
244
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Table, as shown
below:
Figure 5-12134 BGP Neighbor Table window
The fields that can be configured are described below:
Parameter Description
IP Address
Enter the IP address of the BGP speaking neighbor.
Type
Use the drop-down menu to select different types.
None – Select for not specifying the type to display.
Advertised Routes – Select to display the routes advertised to a BGP neighbor.
Received Routes – Select to display the routes received from this neighbor.
Routes – Select to display routes in the routing table learned from the neighbor.
Received Prefix Filter – Select to display the prefix filter information that is received from a
BGP neighbor.
Statistics – Select to display the statistical information learned.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the
View Detail
Click the Delete button to remove the specific entry.
link to view more information regarding the specific entry.
Click the
View Detail link to see the following window.
Figure 5-12235 BGP Neighbor Table - View Detail window
Click the
View Detail
Click the <<Back button to return to the previous window.
link in ORF Prefix List Name to view more information.
Click the
View Detail link in ORF Prefix List Name to see the following window.
To Next Page
Loading...
