D-Link DGS-3620-52P - Page 480

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
470
Parameters description:
num: Error Code or Error Subcode is defined in RFC 4271 etc.
field: field value when an error happen.
ipaddr:
IP address of the BGP peer.
Event description: Receive a BGP notify packet with an undefined error
code or sub error code in RFC 4271.
Log Message: [BGP(4):] BGP Notify: unkown Error code(num), Sub Error
code(num), Peer:<ipaddr>.
Parameters description:
num: Error Code or Error Subcode is defined in RFC 4271 etc.
ipaddr:
IP address of BGP peer.
warning
Event description: Receive a BGP update packet but the next_hop
points to a local interface.
Log Message: [BGP(5):] BGP Update Attr NHop: Erroneous NHop
<ipaddr> Peer:<ipaddr>.
Parameters description:
ipaddr:
IP address of BGP peer.
warning
Event description: BGP connection is closed due to some events
happens. (Event refer to RFC)
Log Message: [BGP(6):] BGP connection is closed due to Event: <num>
(Peer:<ipaddr>).
Parameters description:
num: Event is defined in RFC 4271 etc.
ipaddr:
IP address of BGP peer.
warning
Event description: BGP connection is closed due to receive notify
packet. (Error Code and Error Subcode refer to RFC)
Log Message: [BGP(7):] BGP connection is closed due to Notify: Code
<num> Subcode <num> (Peer:<ipaddr>).
Parameters description:
num: Error Code or Error Subcode is defined in RFC 4271 etc.
ipaddr:
IP address of BGP peer.
warning
Event description: The number of bgp prefix received from this neighbor
reaches the threshold.
Log Message: [BGP(8):] The number of prefix received reaches <num>,
max <limit> (Peer < ipaddr >).
Parameters description:
num: The number of prefix received.
limit: Max number of prefix allowed to receive.
ipaddr: IP address of BGP peer.
warning
Event description: The total bgp prefix number received exceeds the
limit.
Log Message: [BGP(9):] The total number of prefix received reaches max
prefix limit.
warning
Stacking
Event description: Hot insertion.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot insertion.
Parameters description:
unitID: Box ID.
Macaddr: MAC address.
Informational
Event description: Hot removal.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot removal.
Parameters description:
unitID: Box ID.
Macaddr:
MAC address.
Informational
Event description:
Stacking topology change.
Informational