xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
471
Log Message: Stacking topology is <Stack_TP_TYPE>. Master(Unit
<unitID>, MAC:<macaddr>).
Parameters description:
Stack_TP_TYPE: The stacking topology type is one of the following:
1. Ring,
2. Chain.
unitID: Box ID.
Event description: Backup master changed to master.
Log Message: Backup master changed to master. Master (Unit: <unitID>).
Parameters description:
Event description: Slave changed to master
Log Message: Slave changed to master. Master (Unit: <unitID>).
Parameters description:
Event description: Box ID conflict.
Log Message: Hot insert failed, box ID conflict: Unit <unitID> conflict
(MAC: <macaddr> and MAC: <macaddr>).
Parameters description:
unitID: Box ID.
macaddr: The MAC addresses of the conflicting boxes.
Event Description: SNMP request received with invalid community string
Log Message: SNMP request received from <ipaddr> with invalid
community string.
Parameters Description:
Enhancement
Function
Event description: OSPF interface link state changed.
Log Message: OSPF interface <intf-name> changed state to [Up | Down]
Parameters description:
Event description: OSPF interface administrator state changed.
Log Message: OSPF protocol on interface <intf-name> changed state to
[Enabled | Disabled]
Parameters description:
intf-name: Name of OSPF interface.
One OSPF interface changed from one area to
another.
Log Message: OSPF interface <intf-name> changed from area <area-id>
to area <area-id>
Parameters description:
intf-name: Name of OSPF interface.
Event description: One OSPF neighbor state changed from Loading to
Full.
Log Message: OSPF nbr <nbr-id> on interface <intf-name
state from Loading to Full
Parameters description:
intf-name: Name of OSPF interface.
nbr-id: Neighbor's router ID.
One OSPF neighbor state changed from Full to
Down.
Log Message: OSPF nbr <nbr-id> on interface <intf-name
state from Full to Down
notice
To Next Page
Loading...
