DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Configuring Device (Router Mode)
Figure 89. The page for creating a new Static IPv6 connection. The IP section.
Parameter Description
IP
For Static IPv6 type
IPv6 address Enter an IPv6 address for this WAN connection.
Gateway IPv6 address Enter an IPv6 address of the gateway used by this WAN connection.
Primary IPv6 DNS
server/Secondary IPv6
DNS server
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
For Dynamic IPv6 type
Get IPv6
Select a method for IPv6 address assignment from the drop-down
list or leave the Automatically value.
Gateway by SLAAC
Select the checkbox to automatically assign the IPv6 gateway
address with help of SLAAC (Stateless Address Autoconfiguration).
Static IPv6 gateway
address
The static address of the IPv6 gateway. The field is available for
editing, if the Gateway by SLAAC checkbox is not selected.
Obtain DNS server
addresses
automatically
Select the checkbox to configure automatic assignment of IPv6
DNS server addresses. If the checkbox is selected, the Static
primary DNS server and Static secondary DNS server
fields are not available for editing.
Static primary DNS
server/Static secondary
DNS server
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
Page 112 of 304
To Next Page
Loading...
