DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Configuring Device (Router Mode)
Parameter Description
MBSSID
To split the network into several parts in the 5GHz band, select a
relevant value (2, 3, or 4) from the drop-down list. By default, the
wireless network is not splitted (the Disabled value is selected
from the list).
For every part of the WLAN you can specify a name (SSID),
security settings, and rules for MAC filtering. To specify these
values, select the needed part from the BSSID drop-down list and
click the Apply button. Then proceed to the relevant page of the
Wi-Fi menu section.
BSSID
The unique identifier for your Wi-Fi network (for the 2.4GHz and
5GHz band). You cannot change the value of this parameter, it is
determined in the device's internal settings.
If you have splitted your WLAN into parts, the drop-down list
contains several values. Each identifier corresponds to a single part
of the WLAN.
Hide Access Point
If the checkbox is selected, other users cannot see your Wi-Fi
network. (It is recommended not to select this checkbox in order to
simplify initial configuration of your WLAN.)
SSID
A name for the WLAN. By default, the value DIR-816L-5G is
specified. If your network is splitted into parts, each part has the
default name (DIR-816LA1A-5G.2, DIR-816LA1A-5G.3,
and DIR-816LA1A-5G.4). It is recommended to specify another
name for the network upon initial configuration (use digits and Latin
characters).
Country The country you are in. Select a value from the drop-down list.
Channel
The wireless channel number. When the auto value is selected, the
router itself chooses the channel with the least interference.
Wireless mode
Operating mode of the wireless network of the router. This
parameter defines standards of the devices that will be able to use
this band of your wireless network. Select a value from the drop-
down list.
Max Associated Clients
The maximum number of devices connected to the wireless network
of the router (or to the selected part of the WLAN if the network is
splitted into parts). When the value 0 is specified, the device does
not limit the number of connected clients.
Page 143 of 304
To Next Page
Loading...
