DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Configuring Device (Access Point Mode)
In the IPv6 address assignment section, you can configure the built-in the DHCPv6 server of
the router.
Figure 197. The section for configuring the DHCPv6 server.
Parameter Description
DHCP PD
Select the checkbox to activate the Prefix Delegation function. When
the checkbox is selected, the router requests a prefix to configure
IPv6 addresses for clients of the LAN from a delegating router.
Mode
Select an operating mode of the DHCPv6 server from the drop-down
list.
Stateless: clients themselves configure IPv6 addresses using the
prefix.
Stateful: clients receive IPv6 addresses from the range specified in
the Start IP and End IP fields.
Disable: the router's DHCPv6 server is disabled, clients' IPv6
addresses are assigned manually.
Start IP
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
End IP
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
Leased Time
The lifetime of IPv6 addresses leased by the DHCPv6 server. The
field is available for editing, if the DHCP PD checkbox is not
selected.
When all needed settings are configured, click the Apply button.
Page 248 of 304
To Next Page
Loading...
