DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Configuring Device (Access Point Mode)
To undo the last changes, click the Reset button.
After specifying the needed parameters, click the Apply button.
To remove a folder from the list, select the checkbox in the line containing the relevant folder and
click the Apply button.
To disable the built-in DLNA server of the router, deselect the Enabled checkbox and click the
Apply button.
The step-by-step description of how to configure the DLNA server of the router is available on
D-Link website. To access it, click the Setting up DLNA server on the router link in the top
part of the page.
Page 282 of 304
To Next Page
Loading...
