DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Installation and Connection
Control Description
Save
Click the icon to save new settings to the non-volatile memory.
Also you can save the device's parameters via the Save button on
the System / Configuration page.
Reboot device
Click the icon to reboot the device. All unsaved changes will be lost
after the device's reboot.
Get config backup
Click the icon to save the configuration (all settings of the router) to
your PC. The configuration backup will be stored in the download
location of your web browser.
Also you can create the configuration backup via the Backup
button on the System / Configuration page.
Restore config
Click the icon to go to the System / Configuration page.
Reset to factory
Click the icon to restore the factory default settings. Also you can
restore the factory defaults via the Factory button on the System /
Configuration page.
Also you can restore the factory default settings via the hardware
RESET button. The button is located on the bottom panel of the
router. Push the button (with the router powered on) and hold for 10
seconds. Then release the button.
Update firmware
Click the icon to update the firmware of the router.
Also you can update the firmware on the System / Firmware
upgrade page.
Wi-Fi 2.4 GHz
Click the icon to disable or enable the device's WLAN in the
2.4GHz band.
Also you can disable/enable the router's WLAN in the 2.4GHz band
on the Wi-Fi / Basic settings / 2.4 GHz page.
Wi-Fi 5 GHz
Click the icon to disable or enable the device's WLAN in the 5GHz
band.
Also you can disable/enable the router's WLAN in the 5GHz band
on the Wi-Fi / Basic settings / 5 GHz page.
Page 41 of 304
To Next Page
Loading...
