D-Link DIR-895L

44D-Link DIR-895L User Manual
Section 4 - Conguration - Router Mode
Static IP
IP Address: Enter the IP address provided by your ISP.
Service Name: Enter the ISP service name (optional).
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address
Clone:
The default MAC address is set to the Internet port’s physical interface
MAC address on the router. You can use the drop-down menu to
replace the Internet port’s MAC address with the MAC address of a
connected client.
VLAN: For more information on enabling the VLAN feature, refer to VLAN
Bridging on page 51.
Click Save when you are done.
PPPoE (continued)
MAC Address
Clone:
The default MAC address is set to the Internet port’s physical interface
MAC address on the router. You can use the drop-down menu to
replace the Internet port’s MAC address with the MAC address of a
connected client.
VLAN: For more information on enabling the VLAN feature, refer to VLAN
Bridging on page 51.
Click Save when you are done.
Address Mode: Dynamic IP
⌵
Service Name:
Primary DNS Server:
Secondary DNS Server:
MTU:
Auto
⌵
Mac Address Clone: << MAC Address
⌵
VLAN:
Disabled
COPYRIGHT © 2016 D-Link
Address Mode: Static IP
⌵
IP Address:
Service Name:
Primary DNS Server:
Secondary DNS Server:
MTU: Auto
⌵
Mac Address Clone:
<< MAC Address
⌵
VLAN:
Disabled
COPYRIGHT © 2016 D-Link