D-Link M30 - Page 50

46D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
Enable Automatic
IPv6 Address
Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature.
Enabling this feature will present additional conguration options.
Enable Automatic
DHCP-PD in LAN:
Enable or disable Automatic DHCP-PD in LAN for other IPv6 routers
to be connected to the LAN interface. This option is only available
if Enable Automatic DHCP-PD in LAN is enabled.
Note: This feature requires a smaller subnet prefix than /64 (i.e.
allowing for a larger address allocation), such as /63. Contact your
ISP for more information.
Autoconguration
Type:
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
DHCPv6.
If SLAAC+RDNSS or SLAAC+Stateless DHCP is selected as the Autoconguration Type:
Router
Advertisement
Lifetime:
Enter the router advertisement lifetime (in minutes). The
default is 30 minutes.
If Stateful DHCPv6 is selected as the Autoconguration Type:
IPv6 Address Range
(Start):
Enter the starting IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address Range
(End):
Enter the ending IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 - Auto Conguration (SLAAC/DHCPv6)
Advanced Settings... - Address Autoconguration Settings