D-Link X-STACK DES-3200 SERIES - Page 103

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
99
Example
To configure a time range named “1” that starts every Monday at 01:01:01am and ends at
02:02:02am:
DES-3200-28P:admin#config time_range 1 hours start_time 1:1:1 end_time 2:2:2
weekdays mon
Command: config time_range 1 hours start_time 1:1:1 end_time 2:2:2 weekdays mon
Success.
DES-3200-28P:admin#config time_range 1 delete
Command: config time_range 1 delete
Success.
DES-3200-28P:admin#
6-8 show time_range
Description
This command is used to display the current time range settings.
Format
show time_range
Parameters
None.
Restrictions
None.
Example
To display the current time range settings: