D-Link X-STACK DES-3200 SERIES - Show Snmp View

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
542
63-12 show snmp view
Description
This command is used to display the SNMP view record.
Format
show snmp view {<view_name 32>}
Parameters
view - (Optional) View name of the user who likes to show.
<view_name 32> - Enter the view name here. The name can be up to 32 characters long.
Restrictions
None.
Example
To show SNMP view:
DES-3200-28P:admin#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
--------------------- ------------------------ ----------
view123 1.3.6 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView 1.3.6.1.6.3.1 Included
Total Entries: 9
DES-3200-28P:admin#
63-13 create snmp host
Description
This command is used to create a recipient of an SNMP trap operation.
Format
create snmp host <ipaddr> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv] ]
<auth_string32>