D-Link X-STACK DES-3200 SERIES - Config 802.1 X Auth_Mode [Port_Based | Mac_Based]

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
46
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the parameters that control the operation of the authenticator associated with a port:
DES-3200-28P:admin#config 802.1x auth_parameter ports 1-20 direction both
Command: config 802.1x auth_parameter ports 1-20 direction both
Success.
DES-3200-28P:admin#
4-14 config 802.1x auth_mode
Description
This command is used to configure 802.1X authentication mode.
Format
config 802.1x auth_mode [port_based | mac_based]
Parameters
port_based - Configure the authentication as port based mode.
mac_based - Configure the authentication as MAC based mode.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the authentication mode:
DES-3200-28P:admin#config 802.1x auth_mode port_based
Command: config 802.1x auth_mode port_based
Success.
DES-3200-28P:admin#
4-15 config 802.1x init
Description
This command is used to initialize the authentication state machine of some or all ports.