D-Link X-STACK DES-3200 SERIES - Chapter 48 Network Monitoring Command List

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
442
Chapter 48 Network Monitoring
Command List
show packet ports <portlist>
show error ports <portlist>
show utilization [cpu | ports]
show utilization dram
show utilization flash
clear counters {ports <portlist>}
48-1 show packet ports
Description
This command is used to display statistics about the packets sent and received by the Switch.
Format
show packet ports <portlist>
Parameters
<portlist> - Specify a range of ports to be displayed.
Restrictions
None.
Example
To display the packets analysis for port 7: