D-Link X-STACK DES-3200 SERIES - Chapter 77 Password Recovery Command List

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
624
Chapter 77 Password Recovery
Command List
enable password_recovery
disable password_recovery
show password_recovery
77-1 enable password_recovery
Description
This command is used to enable the password recovery mode.
Format
enable password_recovery
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the password recovery mode:
DES-3200-28P:admin#enable password_recovery
Command: enable password_recovery
Success.
DES-3200-28P:admin#
77-2 disable password_recovery
Description
This command is used to disable the password recovery mode.
Format
disable password_recovery