D-Link X-STACK DES-3200 SERIES - Page 629

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
625
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the password recovery mode:
DES-3200-28P:admin#disable password_recovery
Command: disable password_recovery
Success.
DES-3200-28P:admin#
77-3 show password_recovery
Description
This command is used to display the password recovery state.
Format
show password_recovery
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the password recovery state:
DES-3200-28P:admin#show password_recovery
Command: show password_recovery
Running Configuration : Enabled
NV-RAM Configuration : Enabled
DES-3200-28P:admin#